Sulfur Silanes

Sulfur silanes such as Deolink TESPT are primarily used in the rubber industry. Some types are also employed in the coating industry. We offer special variations for the presilanization of fillers or substrates as well as particularly low-odour sulfur silanes.

Improved incorporation of fillers into rubber matrix (Deolink TESPT)Filler functionalization through coating with Deolink TESPT-25.
Lower scorch risk and noticable odor reduction by use of Deolink MX.
Deolink MX is an alternative for conventional mercapto silanes.
Liquid SilaneskgArt.-Nr.
Bis (3-triethoxysilylpropyl) tetra sulfaneDeolink TESPT-10025
200
1000
505916
505917
505918
Thiocarboxy silaneDeolink MX-10025
195
505786
505787
Mercaptopropyl trimethoxy silane
Expected to only be available in 25 kg pails from 2019.
Deolink Mercapto TM-10025
200
505936
505937
Silanes in Pellet Form (Polymer carrier)kgArt.-Nr.
50 % Bis (3-triethoxysilylpropyl) tetra sulfaneDeolink TESPT20100688
50 % Thiocarboxy silaneDeolink MX20100680
Silane EmulsionkgArt.-Nr.
25 % Bis (3-triethoxysilylpropyl) tetra sulfane in an aqueous solutionDeolink TESPT-251000505504

Deolink TESPT-25 Emulsion

is an aqueous emulsion, suitable for the presilanization of mineral fillers. Deolink TESPT-25 Emulsion allows a homogeneous distribution on the filler surface. Further concentrations available on request. You can download the technical data sheet here:

     

Deolink MX-100

is mainly used as an adhesion promoter for sulfur-cured rubber and polyurethane systems. Deolink MX-100 provides a low-odor alternative to conventional mercapto systems and enables a longer pot life. You can download the technical data sheet here:

     

Deolink Mercapto TM-100

is mainly used as an adhesion promoter for sulfur-cured rubber and polyurethane systems. You can download the technical data sheet here: